Ads (728x90)

Here you will find answers to Miscellaneous Questions
Question 1
Cisco_Unified_Client_Services_Framework_Phone_Configuration.jpg
Refer to the exhibit. The exhibit shows a partial screen shot for a Cisco Unified Client Services Framework device. When should this device be configured?
A. when configuring the Service Advertisement Framework feature for Call Control Discovery
B. when Cisco Unified Personal Communicator is used in desk-phone mode.
C. when Cisco Unified Personal Communicator version 7.0 is used in soft-phone mode
D. when Cisco Unified Personal Communicator version 8.0 is used in soft-phone mode
E. when Cisco Unified Personal Communicator version 8.0 is used in desk-phone mode

Answer: A
Question 2
When implementing a plan of action, what should you do?
A. Make all of the changes at once to minimize the impact to users.
B. Limit the impact of the changes to users.
C. Completely remove access lists to ensure that they will not impact the changes.
D. Even if a change adversely affects the users, keep moving forward with the plan of action.

Answer: B
Question 3
Voice_Mail_Change_Password.jpg
Refer to the exhibit. The error message was displayed when the administrator attempted to set the default user password in the user template to four digits long. Which option can rectify this issue?
A. The minimum password length in Cisco Unity Connection should be at least five digits long.
B. The password length needs to be configured under the Authentication Rules settings using the Minimum Credential Length configuration field.
C. The password length needs to be configured under the user template settings using the Minimum Credential Length configuration field.
D. The password length cannot be adjusted under the user template; the password length can only be adjusted under the individual users.

Answer: B
Question 4
Cisco_Unified_Client_Services_Framework_Phone_Configuration2.jpg
Refer to the exhibit. The exhibit shows a partial screen shot for a Cisco Unified Client Services Framework device. If the username that is associated with this device is jdoe, what should the device name be?
A. The device name should be JDOEUPC.
B. The device name should be UPCJDOE.
C. The device name should be JDOE.
D. The device name should be UPCCUPC
E. The device name does not need to relate to the user ID of the user for CSF device.

Answer: E
Question 5
Which two types of device can the Cisco Unified Disaster Recovery use as a backup target? (Choose two.)
A. DVD RAM drive
B. FTP server
C. tape device
D. TFTP server
E. WebDAV server
F. SFTP server
G. CD RAM

Answer: C F
Question 6
What is a benefit of using FRF.12 in a Frame Relay network?
A. provides a Layer 3 mechanism for reducing latency in the network
B. fragments packets into equal sizes to reduce fixed-network delay
C. reduces delay and jitter by expediting the transfer of smaller frames through the hardware transmit queue
D. eliminates the need for prioritization of delay-sensitive traffic

Answer: B
Question 7
In which scenario is it possible to have the same directory number configured on two different lines or phones and not be a shared line?
A. directory number assigned to different partitions
B. directory number assigned to the same partition
C. directory number assigned to different calling search spaces
D. directory number assigned to the same calling search space

Answer: A
Question 8
show_isdn_status.jpg
card type t1 0 0
enbale password cisco
!
isdn switch-type primary-ni
!
controller T1 0/0/0
cablelength short 110
pri-group timeslots 1-24 service mgcp
!
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn swtich-type primary-ni
isdn incoming-voice voice
no cdp enable
!
Refer to the exhibit. Is this configuration correct and is the T1 operational? If not, what is the cause?
A. Yes, the configuration is correct and it is operational.
B. No, the configuration is incorrect and the T1 is not operational because MGCP is not the proper service statement.
C. No, the configuration is incorrect and the T1 is not operational because, the isdn switch-type is incorrect.
D. No, the configuration is incorrect and the T1 is not operational because the isdn-bind-13 ccmmanager command is missing from the serial0/0/0:23 interface.
E. No, the configuration is incorrect and the T1 is not operational because the no ip address command is applied to the serial0/0/0:23 interface.

Answer: D
Question 9
What would be the result if a user logs into Cisco Extension Mobility using a device profile that is not subscribed to the Cisco Extension Mobility Service?
A. Normal Cisco Extension Mobility operation will occur.
B. The user will not be able to log into Cisco Extension Mobility on the phone.
C. The phone will not use the correct device profile.
D. The user will not be able to log out of Cisco Extension Mobility on the phone.
E. The phone will reboot continuously.

Answer: D

Post a Comment

yu

much